Features and Applications
Specialty Splicing Made Easy – The advanced features of the S183PMII allow you to splice today’s and tomorrow’ most exotic fiber types. Whether performing high-strength splices, splicing small cladding fibers (80μm), large cladding fibers (500μm), high Δ splicing combinations, PM fibers, or erbium doped fiber, the S1 3PM I is the splicer for your high-end application.
Fast Splice Time – The splice time is lightning fast at 35 seconds for PANDA and 15 seconds for SM. The S183PM I is the fastest in the industry for most fiber applications, allowing you to increase effciency on your production line.
Safe PM Fiber Rotation – The new rotation mech nism on the S183PM I allows PM fiber to rotate while keeping straight and stable. This minimizes fiber twist, which can be detrimental to sensi- tive splicing applications.
Quick Loading & Automatic Machine Adjustment – T e S183PM I automatically adjusts for different fiber coating and cladding sizes. There is no need to exchange electrodes, v-grooves, or fiber clamps. In addition, the S183PM I has been designed so that the user simply loads the fiber and closes the lid to begin the fusion process. There is no need to lower or set fiber clamps before beginning your splice.
Automatic Fiber Holder Release – The S183PM I automatically performs a tensile proof test on the fiber and releases the holder lid to avoid twisting the fiber after the splice. This automation eliminates the need for the user to manually open and reset the splicer after each fusion splice.
Specifications
SPECIFICATIONS
Applicable Fibers SMF, MMF, DSF, NZDSF, CSF, DCF, EDF, PMF, LDF
Fibers Cleave Length 3 to 5mm with coating clamping / 9 to 11mm with bare Fiber clamping
Cladding Diameter 80~500µm
Coating Diameter 160~2000µm
Typical Insertion Loss (Similar Fiber Splicing) Typical Insertion Loss (Dissimilar Fiber Splicing)
Typical Extinction Ratio (Cross Talk) (Similar Fiber Splicing)
Typical Extinction Ratio (Cross Talk) (Dissimilar Fiber Splicing)
0.02dB for identical SMF / 0.01dB for identical MMF 0.04dB for identical DSF / 0.05dB for identical PM Fibers
0.05dB for SMF to PANDA Fiber / 0.10dB for SMF to TIGER Fiber
0.15dB for SMF to BOW-TIE Fiber / 0.10dB for PANDA Fiber to TIGER Fiber
-40dB (0.6 degree) for identical PANDA Fibers
-32dB (1.4 degree) for identical TIGER Fibers
-32dB (1.4 degree) for identical BOW-TIE Fibers
-32dB (1.4 degree) for PANDA Fiber to TIGER Fiber
-30dB (1.8 degree) for PANDA Fiber to BOW-TIE Fiber
Loss Estimation Parameters Cleave angle, Fiber Offset, Tilt, Micro-bending, Fiber end gap, Bubbling at splice point
Dimensions / Weight 350W × 197D × 154H mm / 8.5kg
15 seconds for identical Single-Mode Fibers
Splice Time
35 seconds for identical PM Fibers (cladding clamping) 55 seconds for identical PM Fibers (coating clamping)
Heating Time 51 seconds for 60mm sleeves
40 seconds for 40mm sleeves
Tensile Strength Typical 300kpsi (25N) with High strength splice
Return Loss >60dB Splice Programs 60 Default / 150 Available
Data Interface USB ver1.1 and Ethernet Splice Memory Maximim 2000 splices
Magnification 215X & 430X Operating Temperature 0 to +40°F (without excessive humidity) Monitor 6” 5-color LCD monitor Storage Temperature -40 to +60°F (without excessive humidity) Video Output Analog RGB Power Source AC 100 to 240V (50 / 60Hz)with AC adaptor
Specifications
| Manufacturer | FITEL (Furukawa Electric) |