Features
- Up to 12-fiber ribbon splicing
- High speed splicing of 15 seconds
- Interchangeable V-groove system
- New 200 μm coating fiber ribbon splicing with swappable V-groove
- Easy operation with touch panel and GUI
- 3 LED lights allow convenient loading of fibers in V-groove
- Wi-Fi Connection allows wireless control and data management
FITEL S124M12 Ribbon Fiber Fusion Splicer
With its low profile and new super rugged body, FITEL S124 Series Fusion Splicer offers speedy operation for FTTX, LAN, backbone or long-haul in lations. The lightweight, durable metal body frame and rubber protection corners provide robust protection, enabling use in challenging locations without compromising splicer performance.
The S124 Splicer is water resistant and dust resistant to IP5X.
A large battery capacity makes it possible to perform up to 170 cycles of splicing and heating for the S124M12 models.
Combining portability, power flexibility and field ruggedness, the S124 Splicer delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use. It also offers a splice-on- connector (SOC) solution.
Built for Tough Environments
The S124 passed manufacturer testing based on criteria below:
- Drop resistant – 76 cm drops from 5 different angles
- Impact protection - IK07 grade impact proof
- Water resistant – IPX2 rating drip proof
- Dust resistant – IP5X rating dust proof
Specifications
| Applicable Fibers | SM (ITU-T G.652 / G.657A1 / G.657A2) MM (ITU-T G.651) DS (ITU-T G.653) NZD (ITU-T G.655) BIF (ITU-T G.657.A1/A2) |
| Cladding Diameter | 125 µm |
| Coating Diameter | 250 to 900 µm for single fiber 280 to 400 µm for ribbon (thickness) 200 µm for rollable ribbon fiber (optional) |
| Fibers Cleave Length | 10 mm (S124M4, S124M8, S124M12) |
| Average Splice Loss | SM: 0.05 dB, MM: 0.03 dB, DSF: 0.08 dB, NZDSF: 0.08 dB, BIF: 0.05dB |
| Splice Time | Single fiber: 13 seconds; Ribbon fiber: 15 seconds |
| Heat Time | Single fiber: 13 seconds (S921: power mode) Ribbon fiber: 28 seconds (S927R: power mode) |
| Splice Programs | Max. 300 |
| Heat Programs | Max. 100 |
| Automatic Heating Start | Available |
| Applicable Sleeves | 40/60 mm |
| Fiber Holding | Tight holder (Loose tube applicable) or Fiber Holder System (S213C) Fiber holder system (S124M4, S124M8, S124M12) |
| Tension Test | 1.96 N |
| Discharge compensation function | Automatic correction according to temperature and atmospheric pressure |
| Fiber Image Magnification | 20X, 28X (in zooming), 56X (in zooming) Two-way observation from X and Y axes |
| Splice Memory | Max. 1500 splices (S124C, S124M4); Max. 1000 splices (S124M8, S124M12) |
| Image Capture Capacity | Last 100 images to be automatically captured + Up to 24 images to be stored permanently |
|
Dimension | 139W x 209D x 114H mm not including shock absorber 179W x 246D x 131H mm including shock absorber |
| Weight | 1.8kg (with battery) |
| Monitor | 4.3 inch wide LCD monitor with touch screen |
| Data Output | USB ver.2 mini B x 1 port, Standard A x 1 port |
| Displaying Language | 20 languages (e.g. English, Spanish, Japanese, Chinese) |
| Battery Capacity | 170 splice and heating cycles |
| Operating condition | Altitude: 0-2,000m Wind protection: 15m/s Operating temperature : -10 to +50 °C (non-condensing) |
| Operating Temperature | -10 to +50 °C (without excessive humidity) |
| Storage Temperature | -40 to +60 °C (without excessive humidity) |
| Power Source | AC: 100-240V (50/60Hz) DC: 11-24V |
*1 Corresponding to optical fiber in compliance with ITU-T recommendation.
*2 This numerical number is the one when measured for the purpose to show the fusion splice characteristics in the testing method of IEC 61073-1, it is not the one to guarantee the splicing loss.
*3 Number of times that the fusion splicing of the fiber and the heat reinforcement can be performed continuously at a rate of once a 90seconds at the room temperature (20°C) condition when using a new 100% charged battery. The number of times you can use depends on the state of the battery and usage.
Specifications
| Fiber Types | 12 Fiber Flat Ribbon Cable (ITU-T G.652D), Dispersion-Shifted Fiber (DSF) (ITU-T G.653), Multimode 50/125μm (OM2, OM3, OM4) (ITU-T G.651.1), Multimode 62.5/125μm (OM1) (IEC60793-2-10), Non Zero-Dispersion-Shifted Fiber (NZDSF) (ITU-T G.655), Singlemode 9/125μm (OS1, OS2) (ITU-T G.652), Ultra Bend Insensitive Fiber (BIF/UBIF) (ITU-T G.657) |
| Manufacturer | FITEL (Furukawa Electric) |
| Model Grouping | FITEL S124 Series Fusion Splicer |
| Type | Splicers - Fusion Splicers |
| Case included? | Hard case |
| Fiber Splice - Clad Diameter | 125μm |
| Fiber Splice - Fiber Count | Single to 12-Ribbon Fibers |
| Fiber Splice - Typical heater time | 12-fiber ribbon: 28 sec |
| Service Interval | 1 Year |
| Warranty Length | 3 Year Warranty on S124 Splicer / 1 Year Warranty on S327 Cleaver & S218R Thermal Stripper |